Upgrading RAM in Apple's white MacBook

Reader Dan wrote in for advice about upgrading to a new white MacBook. He found himself puzzled when it came to the memory situation in low-end model, especially vis-a-vis its aluminum counterparts: 

As you probably know, the white version comes with 2 GB of 667 MHz DDR2 RAM.  The Aluminum version comes with 2 GB of 1066 MHz DDR3 RAM.  Both have a 1066 MHz front side or front system bus... all I know is it has the abbreviation FSB.  My question, which I've posed to crucial.com, but they didn't know, and Apple, ditto (amazingly...), was whether I could take out the 2 GB of RAM in the whitebook and upgrade it to, not only to 4 GB, but also in speed.

Well, wonder no more. You're going to need to stick with the older DDR2, simply because DDR3 RAM isn't designed to be backward compatible. In fact, it's even possible you'll damage the slot by using the newer RAM, so we'd suggest you not try it, lest you end up sadder than the average panda. 

That said, it is possible to upgrade that white MacBook to 4 GB of RAM. The tech spec page for the white MacBook quite clearly says "2GB (two 1GB SO-DIMMs) of 667MHz DDR2 SDRAM; two SO-DIMM slots support up to 4GB." I found a 2 x 2 GB kit (4 GB total) of 667 MHz DDR2 RAM at Other World Computing, but any trustworthy Mac supporting RAM dealer (such as Crucial) should have a similar product. Best of luck, Dan.

To comment on this article and other Macworld content, visit our Facebook page or our Twitter feed.
Related:
Shop Tech Products at Amazon
Notice to our Readers
We're now using social media to take your comments and feedback. Learn more about this here.