| General |
| Type of Switch |
Ethernet Switch |
| Interfaces |
20 x RJ-45 10/100/1000Base-T Network LAN|4 x RJ-45 10/100/1000Base-T Network Uplink|1 x RJ-45 Console Management |
| Number of Network Ports |
24 |
| Standards |
IEEE 802.3-LAN|IEEE 802.3ab|IEEE 802.3ad|IEEE 802.3U-LAN|IEEE 802.3x|IEEE 802.3z |
| Additional Specifications |
| Frequency Band |
LAN Base Image installed Each dual-purpose uplink port has one 10/100/1000 Ethernet port and one SFP-based Gigabit Ethernet port, 1 port active. Configurable up to 8000 MAC addresses Configurable up to 255 IGMP groups Superior Redundancy for Fault Backup Integrated Cisco IOS Software Features for Bandwidth Optimization Granular Rate Limiting Networkwide Security Features |
| Connectivity Media |
Category 5 UTP 10/100/1000Base-T |
| Redundant Power Supply |
Yes |
| Number of Total Expansion Slots |
4 |
| Management |
Cisco Network Assistant CiscoWorks Support Device manager Cisco Express Setup CiscoView application Cisco Network Assistant Software Advanced QoS Trivial File Transfer Protocol (TFTP) reduces the cost of administering software upgrades by downloading from a centralized location Network Timing Protocol (NTP) provides an accurate and consistent timestamp to all intranet switches Cisco IOS CLI support provides a common user interface and command set with all Cisco routers and Cisco Catalyst desktop switches Cisco Service Assurance Agent (SAA) support facilitates service-level management throughout the LAN Switching Database Manager templates for security and QoS allow administrators to easily adjust memory allocation to the desired features based on deployment-specific requirements VLAN trunks can be created from any port using standards-based 802.1q tagging Up to 255 VLANs per switch or stack and up to 128 spanning-tree instances per switch are supported. Four thousand VLAN IDs are supported Voice VLAN simplifies telephony installations by keeping voice traffic on a separate VLAN for easier administration and troubleshooting Cisco VTP supports dynamic VLANs and dynamic trunk configuration across all switches SNMP v1, v2c, and v3 and Telnet interface support delivers comprehensive in-band management, and a CLI-based management console provides detailed out-of-band management Cisco Discovery Protocol Versions 1 and 2 help enable a CiscoWorks network-management station for automatic switch discovery |
| Uplink Port |
Yes |
| Layer Support |
2 |
| Number of SFP Slots |
4 |
| Product Line |
Catalyst |
| Shared SFP Slot |
Yes |
| Media Type Supported |
Twisted Pair |
| Number of Network (RJ-45) Ports |
20 |
| Product Model |
2960G-24TC-L |
| Twisted Pair Cable Standard |
Category 5 |
| Total Number of Network Ports |
24 |
| Front Camera |
Cisco |
| Performance |
35.7Mpps Forwarding Rate For 64-byte Packet |
| Product Series |
2960 |
| Brand Name |
Cisco |
| Manageable |
Yes |
| Quick Glance |
| Green Compliance |
RoHS-5 |
| Number of Ports |
24 |
| Network Support |
20 x RJ-45 10/100/1000Base-T Network LAN|4 x RJ-45 10/100/1000Base-T Network Uplink|1 x RJ-45 Console Management |
| Dimensions |
| Weight |
9.92 lbs |
| Dimensions |
1.73" Height x 17.50" Width x 12.90" Depth |
| More Info |
| Green Compliance |
RoHS-5 |
| URL |
http://www.cisco.com |
| Warranty Information |
3 Year |
