capsule review

500MHz G3 Upgrade Cards

Today's Best Tech Deals

Picked by Macworld's Editors

Top Deals On Great Products

Picked by Techconnect's Editors

At a Glance
  • Sonnet Technologies . Encore G3

Apple has moved on--from beige to blue to the latest graphite-and-white G4 systems--but you and your older Power Mac G3 may not be prepared to follow. If a new Power Mac G4, or even a G4 processor upgrade for your beige or blue-and-white Power Mac G3, would bust your budget, consider a less-expensive G3 upgrade. Macworld Lab tested four 500MHz G3 accelerators--Newer Technology's Maxpowr G3-G3, PowerLogix's PowerForce G3, Sonnet Technologies' Encore G3, and XLR8's Mach Carrier G3--and found that, once again, our test results favored the Newer accelerator by a very slight margin.

All of the cards except for XLR8's Mach Carrier G3 install in the Zero Insertion Force (ZIF) sockets of the desktop and minitower beige Power Mac G3, all-in-one G3, and blue-and-white Power Mac G3. Although we received XLR8's 500MHz G3 processor bundled with the CarrierZIF Upgrade Adapter, you can get the processor-only Mach Speed G3z for $50 less.

Installation is a simple affair with all four cards. The Newer, PowerLogix, and XLR8 upgrades come with some kind of driver and control panel for configuring their backside-cache speed. The Sonnet upgrade doesn't require additional software, but you also can't configure it. After installing the software for those upgrades that require it, you simply swap the old processor for the new one. Newer's and Sonnet's manuals offer the clearest instructions for installing the card.

There's very little real-world difference between these upgrades. Each of the four accelerators runs at 500MHz and carries a 1MB backside cache, so it's not surprising that they all yielded similar results. The Newer upgrade produced the best scores, with the PowerLogix and XLR8 cards close on its heels. The Sonnet accelerator consistently lagged behind the other three. All four significantly outperformed a 350MHz blue-and-white Power Mac G3.

Those who wish to overclock the processors will find the difference between upgrades most apparent. XLR8 provides extensive charts for setting jumpers and switches to increase processor speed. The PowerLogix card sports a dial for this purpose but offers fewer settings. Newer provides no information for overclocking its upgrades via the four DIP switches, while Sonnet actually prevents you from changing the processor speed.

August, 2000 page: 46

At a Glance
  • Pros

    • Least expensive
    • Completely plug-and-play. 


    • Not configurable
    • Slower than its rivals
1 2 Page 1
Page 1 of 2
Shop Tech Products at Amazon