Today's Best Tech Deals
Picked by Macworld's Editors
Top Deals On Great Products
Picked by Techconnect's Editors
Back in January, in an article about iPod accessories at CES, I talked about iTunes Tagging, a unique new technology, related to HD Radio, that attempts to solve the decades-old dilemma of hearing a song on the radio but not knowing what it is or where to buy it. The short description of iTunes Tagging is that when you hear a song you like on HD Radio, you press a button on your radio to “tag” the song; your iPod later transfers tag data to iTunes on your computer, where you can then purchase the song.
If the folks behind HD Radio have their way, iTunes Tagging will eventually find its way into a wide range of products, from home stereos to car-audio systems. But right now, the technology is found only in a limited number of iPod speakers. Polk’s $499 I-Sonic ES2 is the first of those products we’ve tested.
In many ways, the I-Sonic ES2 is similar to myriad other “desktop”-sized iPod speaker systems, although the I-Sonic’s angled front, up-swooping top, and curved sides give the system a somewhat-unique appearance. At 14.3 inches wide, 10 inches deep, and 5 inches high at its largest dimensions, the system is big enough to offer good sound quality but small enough to fit on a desk, nightstand, or countertop.
On the top is an iPod dock cradle, using Apple’s Universal design, that charges your iPod while grabbing audio and video via the iPod’s dock-connector port. (Polk includes dock inserts numbers 3, 4, 5, 6, 7, and 12, accommodating iPods from the original iPod mini to the final fourth-generation models, as well as the iPhone. Other dockable iPods include their own adapters, although those are white, whereas Polk’s adapters are black. Also, as noted below, iTunes Tagging doesn’t work with all iPods.) A nice feature is a flip-down door that hides the dock cradle, and keeps out dust, when an iPod isn’t docked. Next to the dock, and also under this door, is a headphone jack for private listening.
The top of the I-Sonic ES2 also hosts an array of controls for controlling volume, the system’s radio tuner, the built-in alarm clock, iPod playback, and audio source. The buttons are clearly labeled and easy to use, although iPod-playback control is oddly limited to skipping/scanning tracks; you must use the iPod’s own Click Wheel or the I-Sonic’s wireless remote for pausing and resuming playback. All other iPod control requires the iPod’s Click Wheel, which can be difficult with smaller iPods due to the depth of the I-Sonic’s cradle. There’s also a Settings button that lets you tweak the I-Sonic’s bass and treble levels, adjust the built-in screen’s backlight and contrast levels, set Sleep mode, and choose the gain level of the auxiliary-input connection).
On the front of the I-Sonic, you’ll find a 2.5-inch by 1.25-inch screen that displays information such as the time, the current audio source, and, when in radio mode, the current radio station and station signal strength. In addition, the screen will display artist and song names if a station includes the information in the signal or if you’re listening to a newer iPod. (This feature doesn’t work with iPod mini and fourth-generation iPods, including the iPod photo.) For the most part the screen is clear and readable; however, with quickly-changing text—for example, when scanning radio stations or when longer text scrolls across the screen—you’ll see some ghosting, and the text is too small to read from across a bedroom or office. I also found that some special characters that appear correctly on the iPod’s screen do not appear correctly on the I-Sonic’s screen; for example ó becomes Ã3.
The front of the unit also hosts two (left and right) 2-inch speaker drivers hidden behind removable gray-fabric grilles. However, unlike many other iPod speaker systems, the I-Sonic also has two similar speaker drivers on the back of the unit, which means you don’t have to be sitting directly in front of the system to enjoy its audio; those behind the I-Sonic can enjoy roughly the same sound quality as those sitting in front of it. (Polk calls this design I-Sonic, which is where the system gets its name. The company also sells another I-Sonic system without iPod compatibility.)
Finally, the back of the I-Sonic ES2 hosts connections for AM and FM antennas (an AM antenna and two FM antennas—one single-wire and one dipole—are included); left and right RCA inputs for connecting an auxiliary audio source; left and right variable-level RCA outputs for connecting the I-Sonic to a larger audio system; composite- and S-video outputs; and a USB “service port” (presumably for potential software upgrades; it doesn't let you sync your iPod with your computer). The I-Sonic ES2’s video outputs—for viewing your iPod’s video and photos on a TV—work with all video-capable iPods, including the iPod classic, third-generation iPod nano, iPod touch, and iPhone. The use of RCA connectors for audio input and output makes the I-Sonic feel more like a good stereo component than a desktop radio.
The included wireless, infrared remote control offers a nice set of options for controlling the I-Sonic, including basic power, volume and iPod-playback buttons; Tune, Seek, and Preset buttons for the radio; Sleep and Alarm controls; direct access to each audio source (FM, AM, auxiliary, and iPod); and buttons to adjust the display and engage the iTunes Tagging feature (covered below). The remote uses a “bubble” button design—slightly-raised buttons built into the surface of the remote—which I generally don’t like, but the buttons have a much better tactile response than most of this type. The remote’s range is very good, even off to either side, although there’s a bit of a delay between pushing a button on the remote and the I-Sonic responding.
Finally, those looking for a more-complete home-entertainment system in a small package will welcome an upcoming add-on DVD player that will mount directly underneath the I-Sonic ES2.
Listen in HD
As with a number of desktop iPod speaker systems, the I-Sonic ES2 includes a clock radio with a single alarm and a sleep function. The clock, alarm, and sleep functions are easy to set, and you can choose to wake up to an alarm tone or the radio (but not your iPod). Sleep mode and the alarm can be set using either the wireless remote or the buttons on the I-Sonic itself. When the system is turned off, the time display fills the screen and is readable from across the room; as mentioned previously, you can also adjust the screen’s brightness and contrast. A nice touch is that the large Snooze/Mute button, just in front of the iPod dock, has three raised dimples on it, making it easier to locate by touch when you’re waking groggily from sleep.
It’s the I-Sonic ES2’s radio that really makes it stand out from the crowd. In addition to standard AM/FM tuning, the I-Sonic also supports HD Radio. For those who’ve never used HD Radio, it’s essentially an over-the-air, digital alternative to standard radio that offers higher quality and additional features. As long as your favorite station broadcasts in HD, you can listen to that HD version for free with any HD tuner. (Although HD Radio is available for both the AM and FM bands, most stations that have upgraded to HD broadcasts are found on the FM dial.) HD Radio uses High Efficiency AAC (HE-AAC) to compress audio, and currently lets AM stations provide sound quality roughly comparable to traditional FM stereo, with HD Radio FM offering potentially—and usually—much better sound. (HD Radio proponents often claim HD FM is “CD-quality,” but it’s not.)
HD Radio also offers several other benefits. A major one is that, because the signal is digital, there’s no multi-path interference or static—for the most part, stations either tune in well or they don’t tune at all. (Most current HD radios automatically fall back to standard AM or FM if the HD version can’t be received reliably.) Another feature is enhanced text information. Similar to the RDS feature available with some analog stations, HD Radio stations can include textual data in their signals. For many stations, this is essentially artist names and song titles, but it can also include information such as weather or traffic alerts. The I-Sonic ES2 displays this text on its screen.
Finally, another benefit of HD Radio—and perhaps the most compelling one for many people—is additional content. Specifically, each station can have multiple “channels,” each with different programming. For example, near my home here in the San Francisco/San Jose area, the FM radio station KFOG broadcasts on 97.7. The HD version of KFOG has two HD channels: 97.7-1, which mirrors the analog version, and 97.7-2, which continually broadcasts episodes of KFOG’s well-known “10@10” radio program. (The downside to offering multiple channels is that the audio quality of each channel is reduced as the broadcaster splits its assigned bandwidth into several smaller streams.)
The I-Sonic ES2’s radio tuner works well overall, although it does have a few annoying issues. On the positive side, when you tune to an FM frequency, the radio automatically checks to see if an HD alternative is available; if so, the tuner switches to the HD version and an HD icon appears on the screen. If multiple channels are available for that HD station, you then tune to them using the standard Tune and Seek controls; for example, if you’re listening to 97.7-1, pressing the Tune Up or Seek Up button will take you to 97.7-2. FM reception—analog and digital—was good for my area, and the I-Sonic was able to lock on to the HD version of most local FM stations that offer such a broadcast.
On the AM side, analog AM reception was typical of radios I’ve tested, which is to say not very good; static and interference made few AM stations listenable. On the other hand, reception for AM HD Radio stations—which, unfortunately, are few and far between in my area—was eye-opening. The initial tuning to the analog version presented a scratchy, staticky signal, but a few seconds later the I-Sonic ES2 locked on to the HD version, producing a clear, even enjoyable, signal.
Although I’m not sure why you’d want to, I couldn’t find a way to manually revert from the HD version of a station to the analog version.
On the downside, sometimes after releasing the Up or Down button, the tuner seemed to have momentum, stopping a second or two later. (I think what was actually happening is that the screen was often slow to “catch up” to the frequencies being scanned. For example, when scanning from 97.7 to 99.7, I’d hear the latter station while the display showed 98.5; it would take another second before the display reflected the actual station.) Obviously, this can make scan tuning frustrating. Tuning to an HD Radio station’s alternate channels is also slow, as you have to first tune to the main station and wait for the I-Sonic ES2 to switch to the HD stream, then use the Tune Up button to switch to the -2 or -3 alternate. (If you frequently listen to an alternate channel, I recommend saving it as a preset.) Finally, one other minor inconvenience is that when you switch to the radio, it can take a few seconds before the radio locks on to the previous station.
The I-Sonic ES2 can save 18 FM and 6 AM presets; alternate HD channels can be saved as presets.