The Institute of Electrical and Electronic Engineers Inc. (IEEE) has approved the draft of a new wireless LAN standard — 802.11g — that will provide raw data speeds of 54M bit/sec. in the same 2.4GHz frequency band now used by the older and widely used 802.11b standard.
Brian Grimm, a spokesman for the Wireless Internet Compatibility Alliance in Mountain View, Calif., said he doesn’t expect to see any 802.11g products hit the market until at least next summer, since the draft specification still requires final approval.
Grimm said that since the 802.11g standard is backward-compatible with the 802.11b standard, users with a “b” card will be able to access a “g” network, but only at the 11M bit/sec. data rate of “b” systems.
Alan Reiter, an analyst at Wireless Internet & Mobile Computing in Chevy Chase, Md., said the 802.11g wireless LAN systems should also provide users with the same range (roughly between 100 feet and 300 feet indoors, double that distance outdoors) as “b” systems, saving organizations that adopt the new standard from having to install new antennas or access points.
That’s not the case with the 802.11a standard approved by the IEEE last year. It also offers data rates of 54M bit/sec., but in the 5GHz frequency band, which has less range than the 2.4GHz band. Grimm said the 5GHz band offers less likelihood of interference from cordless phones and microwave ovens — which also operate in the 2.4GHz band — and a wider band, 200MHz of spectrum for the “a” standard vs. 83MHz for the “b” standard.
Grimm said wireless LAN manufacturers will try to cover their bets by offering combination access points that operate either in the “a” or “g” band, with “g” systems also supporting users with “b” cards.
For more enterprise computing news, visit Computerworld.com. Story copyright (c) 2002 Computerworld, Inc. All rights reserved.