iPads are great for kids, but kids aren’t always that good for iPads. One stray elbow, and your pristine tablet has a spider web of cracks dancing across its screen. No matter how careful we try to be, a cracked or shattered screen is just one accident away. If you paid the $99 for AppleCare+ for your iPad (available only within 30 days of purchase), and your tablet suffers accidental damage, Apple will replace your broken iPad up to twice, for $49 each time, during the two-year coverage period. Otherwise, getting it fixed by Apple can cost you $200 to $300 dollars. There are also plenty of third-party mail-in or drop-off services (if you’ve been to a mall lately, you’ve probably noticed a kiosk that fixes phones and tablets), but there’s another, more hands-on way to go: Fix the broken screen yourself.
You’ll need to procure a replacement screen, which will most likely also have a digitizer attached to it. The digitizer is what translates your taps and gestures into input on the iPad. If your LCD panel is also damaged, you can replace that at the same time (the LCD panel sits right underneath the front glass). But for just the screen and the digitizer, you can pick up a kit online in the $50 to $100 range. You can also take this opportunity to switch from a black iPad model to a white one, if you like. We bought this screen for our damaged iPad 2 on Amazon for $30. It came with no instructions of any kind, and the reviews from buyers suggested seeking out YouTube videos to walk you through the process.
Once you have the necessary replacement parts, I recommend taking the time to read through iFixit’s excellent guide to replacing the front panel. iFixit uses a special microwavable pouch that gets hot to loosen the adhesive holding the screen to the rest of the iPad, but a heat gun can work just as well, which is what the Macworld Lab used (or you can even use a hair dryer if you’re really roughing it). Also note, some videos online mention the use of an X-Acto knife or a scalpel to separate the front panel from the iPad body, but I highly recommend using something less destructive, like the guitar picks that iFixit opts for. I ended up accidentally damaging two cables (one for power/volume/toggle, and the other for the Bluetooth/Wi-Fi module) as a result of confusing directions, use of a razor, and the fact that this iPad was purchased refurbished from a third-party and clearly had already undergone a poorly executed screen replacement.
Pay special attention to the cables that run right next to the front glass panel. If you make a mistake and damage them, replacement is possible, but you’ll have to order new parts. The slower you proceed, the more likely you are to perform the repair without error.
Bear in mind that even if you make the repair successfully, there’s no guarantee that the digitizer will work as expected (especially if you buy cheap like we did). Although we got the iPad reassembled with the new screen, it now suffers from occasional fits of phantom “touches” that cause it to select portions of the screen even when left alone on a tabletop. One minute we were looking at the home screen, and the next the iPad launched the Notes app and started typing out random gibberish. Spoooky!
The bottom line is, replacing an iPad screen isn’t as simple as adding RAM to your new iMac, and most people will choose to have someone else do the repair. But if you’re up for a challenge, it’s certainly doable. And with this particular iPad—which is used mostly by two kids—having a screen that won’t cut their fingers made the replacement essential. Even if there’s now a ghost in the machine.
Note: When you purchase something after clicking links in our articles, we may earn a small commission. Read ouraffiliate link policyfor more details.
Albert is a former PCWorld and Macworld intern and GeekTech writer, who now works as an Editorial Assistant in the PCWorld Lab. Albert likes to dabble in Web development in his free time. Check him out on Dribbble, or see some of his work on CodePen.