Anker PowerCore+ 20100 review: A top-performing USB-C battery pack

If you need a high-capacity battery that can fully charge a 12-inch MacBook, this is your best bet.

anker 20100

Today's Best Tech Deals

Picked by Macworld's Editors

Top Deals On Great Products

Picked by Techconnect's Editors

At a Glance
  • Anker PowerCore+ 20100

The following review is part of our USB-C battery pack roundup. Click a link below to read the following:

Note: When this review was originally published, Anker listed its USB-C port at 5V at 3A. Later, the company changed some, but not all, of its marketing material to note 2.4A; on Amazon, where it sells its products directly, the 3A rating still appears, and we saw 3A performance during testing. We contacted Anker and were unable to get a reply about this discrepency.

The Anker performed best in our tests, has an attractive shape and material that fits nicely in the hand, and features a perfectly adequate three ports, including a combined in/out USB-C charging port. Even when charging or discharging at its maximum rate, it remains cool to the touch due to its aluminum casing.

If you need a high-capacity battery that can fully charge a 12-inch MacBook, this is your best bet. At about $50, that’s far cheaper (especially adjusted for inflation) than what a removable replacement used to cost when Mac laptops offered swappable batteries.

Besides the USB-C port, which is rated for 2.4A output, it has two Type-A ports which can each pump up to 2.4A, although the battery maxes out at 6A. With three devices plugged in, no one port will get more than 2.4A. Its ports have minimal markings, unlike most packs, because the Type-A ports are identical.

In testing with a MacBook, the Anker had the best outcome. Its 20,100 mAh of internal cells managed to charge a MacBook from fully drained to a 100 percent indicator using about 90 percent of its stored power. You could still charge an empty iPhone to full or an iPad about 20 to 30 percent with that remaining charge. When fully charged, it should be able to charge an iPad Air 2 at least twice, or an iPad Pro about 1.5 times.

You’d think LEDs would be a by-the-way feature, but Anker made extremely fine decisions with its design, both in terms of the Apple-like elegance of tiny blue pinpricks of lights, to the inclusion of ten of them. This provides the most granular battery status among units tested and my general experience with USB packs, showing 10 percent increments. It uses a slow cycling animation while the battery charges, leaving LEDs lit to indicate the current filled percentage.

The only drawback with this model is that when you’re using it to charge via its USB-C port, you have to press its battery-status button to start the process. It’s documented in a tiny included manual, the type size of which requires a magnifying glass, but it’s non-obvious.

(I managed to drop this battery on a concrete floor after testing, and while it was lightly scuffed, it took took the damage extremely well.)

Pack includes mesh carrying bag with drawstring, USB-C to Type-A cable, USB-C to Micro-USB cable. 18-month warranty.

Note: When you purchase something after clicking links in our articles, we may earn a small commission. Read our affiliate link policy for more details.
At a Glance
  • Anker PowerCore+ 20100

Shop Tech Products at Amazon